Service Information: Brackett Aircraft
There will be over 135,000 documents in our Service Information Indexes.
Most SBs are displayed in PDF format. (Use your Browser's 'Edit | Find' function to locate an SB by number.)
Search Within this page
Documents| Name | Revision | Lang | Subject | Date |
|---|
| Doc I-194 |
|
en |
Continued Airworthiness Inspection Requirements as per FAR 23.1529 and General Procedures of Part 43 | 3/16/1994 |
Instruction Sheets| Name | Revision | Lang | Subject | Date |
|---|
| IS BA-2004 |
|
en |
Assembly Part No. BA-2010 | 6/6/1995 |
| IS BA-4105 |
|
en |
Assembly Part No. BA-4106 | 6/15/1995 |
| IS BA-4205 |
rev |
en |
Assembly Part No. BA-4210 | 6/14/1995 |
| IS BA-5105 |
rev |
en |
Assembly Part No. BA-5110 | 5/8/1995 |
| IS BA-5111 |
rev |
en |
Assembly Part No. BA-5110A | 5/8/1995 |
| IS BA-6105 |
rev |
en |
Assembly Part No. BA-5110 | 6/5/1995 |
| IS BA-8910-03 |
|
en |
Assembly Part No. BA-8910 | 6/6/1995 |
| IS RM-1 |
|
en |
Induction Air Filter Replacement | 7/6/1995 |
Service Bulletins| Name | Revision | Lang | Subject | Date |
|---|
| SB 1 |
|
en |
Mandatory Expanded Metal Retainer which Holds Foam Element from Going into Engine Failed | 8/21/1978 |
| SB 2 |
|
en |
Mandatory Cracks have been Found in Weld Areas where Retainer is Welded onto Frame | 9/15/1978 |
| SB 3 |
rev |
en |
Cracks have been Found in Weld Areas where Retainer is Welded onto Frame | 3/1/1979 |
| SB 4 |
|
en |
Cracks have been Found in Weld Areas where Retainer is Welded onto Filter Frame | 7/15/1980 |
| SB 5 |
|
en |
Loose Gaskets | 7/28/1980 |
| SB 6 |
1 |
en |
Cracks have been Found in Weld Areas where Retainer is Welded onto Filter Frame | 6/29/1981 |
| SB 7 |
|
en |
Reports where an Airlock Fastener has Come Loose, Allowing Solvents and Oils to Loosen Gasket from Screen, Allowing Possibility of Gasket Ingestion | 3/1/1985 |
| SB 8 |
|
en |
Availability of Kit No. BA-81C | 9/1/1981 |
| SB 9 |
|
en |
Replace Existing Screen Gasket with a Riveted in Screen and 2 each Gasket Retainer Strips plus Cementing on a New Gasket to Frame | 8/20/1981 |
