Service Bulletins| Name | Revision | Lang | Subject | Date |
|---|
| SB 808-10 |
|
de |
Welding Work Using Modern Welding Processes TIG (Tungsten Inert Gas) | 4/28/1996 |
| SB 808-18 |
4 |
en |
Mandatory Visual Inspection of Elevator Mass Balance Due to Recurring Formation of Cracks | 10/10/2018 |
| SB 808-19 |
|
de |
Installation of Rotax Engine 912 S3 Based on AVo68-R100 Series to Improve Towing Performance of Motor Glider | 3/9/2007 |
| SB 808-20 |
|
de |
Changing Material of Hollow Screws for Main Spar Fitting | 3/23/2007 |
| SB 808-21 |
|
de |
Modification of Engine Mount | 1/9/2008 |
| SB 808-21 |
1 |
de |
Modification of Engine Mount | 1/9/2008 |
| SB 808-22 |
|
de |
Recognized Repair Procedures According to EU Regulation 1702/2003, Part 21, Section M | 6/16/2010 |
| SB 808-24 |
|
de |
Installation of a WIMI FVA 24c | 11/9/2009 |
| SB 808-25 |
|
de |
Convert Right Brake Flap Lever to Left | 11/9/2009 |
| SB 808-30 |
|
de |
Fastening Plate for Wheel Trim | 7/12/2013 |
| SB 808-31 |
|
en |
Mandatory Change of Measurement Method from Cylinder Head Temperature to Coolant Temperature for ROTAX Engine 912 and 914 (Series) | 2/27/2015 |
| SB 808-32 |
|
en |
Adaption of Oil Coller Mount and Attachment of New Oil Cooler Mount on Cowling | 2/10/2016 |
| SB 808-33 |
|
en |
Mandatory Replacement of Elevator Mass Balance Due to Recurring Formation of Cracks | 2/17/2021 |
| SB 808-34 |
|
en |
Slotted Hole Modification of Elevator Mass Balance | 6/18/2021 |
| SB 808-35 |
|
en |
Replacement of Bowden Cable for Control of Engine Cooling Air Flap at Cowling Bottom Side | 2/20/2023 |
| SB 808/HO-V-62 |
|
de |
Conversion to AVO 68-v "Samburo" Series | 6/11/1984 |
| SB 808/L 2000 |
|
de |
AVO 68-V - Replace Limbach SL 1700 EI Engine with a Limbach L 2000 E0 1; - Replacing HO-V 62 R/L 150 A Propeller with HO-V 62 R/L 160 T Propeller; AVO 68-5; - Replacing Limbach SL 1700 EI Engine with a Limbach L 2000 E0 1; - Replacing HO-11-150 B 75 L Propeller with HO11 A-150 B 90 L Propeller | 7/1/1983 |
| SB MD01-001 |
|
en |
Mandatory Jet System Engine Wiring Loom Damage Inspection and Repair | 11/15/2018 |
| SB MD01-003 |
|
en |
Jet System Engine Fuel Line Replacement | 1/25/2022 |
| SB MD01-004 |
|
en |
Mandatory Inspection of Airbrake Blade 3 (Bottom Blade) | 9/30/2020 |
| SB MD01-004 |
1 |
en |
Mandatory Inspection of Airbrake Blade 3 (Bottom Blade) | 3/10/2021 |
| SB MD01-005 |
1 |
en |
Tip Drain & Filling Cap Installation | 3/26/2021 |
| SB MD01-007 |
|
en |
Safety Harnesses Replacement | 12/3/2024 |
| SB MD02-001 |
|
en |
Conversion of Pre-Type-Certificate (Pre-TC) Engines to Certified Standard | 1/28/2016 |
| SB MD02-002 |
|
en |
Modification of Engine Air Intake | 11/27/2019 |
| SB MD02-004 |
|
en |
Replacement and Use of a Modified Glow Plug Igniter | 6/2/2020 |
| SB MD02-005 |
|
en |
Replacement of AN-Fitting with a Modified Version and Integrated Fuel Filter | 11/18/2020 |
| SB MD02-005 |
2 |
en |
Replacement of AN-Fitting with a Modified Version and Integrated Fuel Filter | 1/14/2022 |
| SB MD02-005 |
3 |
en |
Replacement of AN-Fitting with a Modified Version and Integrated Fuel Filter | 7/20/2022 |
| SB MD02-005 |
reiss |
en |
Replacement of AN-Fitting with a Modified Version and Integrated Fuel Filter | 9/18/2020 |
| SB MD07-001 |
|
en |
LS 4 Jet Engine Installation (STC) | 11/23/2022 |
| SB MD07.04-001 |
|
en |
LS4 Jet Engine Installation (STC) | 6/30/2025 |
| SB MD10-001 |
|
en |
Mandatory EGT Sensor Location | 7/7/2020 |
| SB MD10-002 |
|
en |
Tip Drain & Filling Cap Installation | 8/3/2020 |
| SB MD10-003 |
|
en |
Canopy Gas Strut Inspection | 9/24/2020 |
| SB MD10-004 |
|
en |
Mandatory Belly-Hook Release Cable Replacement | 12/1/2020 |
| SB MD10-005 |
|
en |
Tailwheel Main Shaft Locknut Inspection | 12/1/2020 |
| SB MD10-006 |
|
en |
Brake System In-Line Accumulator Installation | 3/11/2021 |
| SB MD10-007 |
|
en |
Mandatory Stabilizing of Tailwheel Cable | 3/11/2021 |
| SB MD10-007 |
1 |
en |
Mandatory Stabilizing of Tailwheel Cable | 9/13/2021 |
| SB MD10-008 |
|
en |
Jet Main Fuel Line Damaged by Pylon | 6/18/2021 |
| SB MD10-009 |
|
en |
Air Sense Probes Dimension Inspection | 6/8/2021 |
| SB MD10-010 |
|
en |
Jet Pressure Sensor Controller Update | 2/8/2022 |
| SB MD10-011 |
|
en |
Rudder Panel Footplates | 1/25/2022 |
| SB MD10-012 |
|
en |
Jet System Retrofit for Sailplane JS-MD 3 | 3/2/2022 |
| SB MD11-006 |
2 |
en |
Mandatory Revised Operating Restrictions for Propulsion System | 6/25/2025 |
