Service Bulletins| Name | Revision | Lang | Subject | Date |
|---|
| SB 146-32-148 |
|
en |
Landing Gear - Main Landing Gear - Side Stay - Inspection of the Side Stay for Cracks | 04/17/2000 |
| SB 146-32-157 |
|
en |
Landing Gear - Main Landing Gear - Inspection of the Shock Absorber Lower Attachment Pin | 02/12/2009 |
| SB 146-32-174 |
2 |
en |
Landing Gear - Nose Landing Gear - Inspection of the Main Fitting for Cracks | 08/16/2010 |
| SB 200-32-263 |
|
en |
Landing Gear - Main Landing Gear - Inspection of the Torque Link Apex Joint | 02/01/2000 |
| SB 200-32-286 |
3 |
en |
Landing Gear - Main Landing Gear - Inspection of the Sliding Tube for Cracks | 10/03/2008 |
| SB 200-32-315 |
|
en |
Landing Gear - Main Landing Gear Complete - Side Stay Complete - Side Stay Basic - Introduction of New End Caps and Bolts for the Upper and Lower Cardan Joints | 04/24/2015 |
| SB 201-32-43 |
3 |
en |
Landing Gear - Main Landing Gear - Inspection of the Sliding Tube for Cracks | 10/03/2008 |
| SB 201-32-63 |
|
en |
Landing Gear - Main Landing Gear Complete - Side Stay Complete - Side Stay Basic - Introduction of New End Caps and Bolts for the Upper and Lower Cardan Joints | 04/24/2015 |
| SB 470-32-806 |
|
en |
Landing Gear - Main Landing Gear Actuating Cylinder - NDT Inspection of Thread of the Rod | 10/27/2005 |
| SB 631-32-125 |
|
en |
Main Landing Gear - Inspection of the Main Landing Gear Leg/Aircraft Hinge Pins and Brace Assembly Center Pin | 05/07/1996 |
| SB 631-32-126 |
|
en |
Main Landing Gear - Inspection of the Main Landing Gear Swinging Lever/Barrel and Shock Absorber/Universal Joint Hinge Pins | 05/07/1996 |
| SB 631-32-127 |
1 |
en |
Main Landing Gear - Inspection of the Main Landing Gear Leg/Aircraft Hinge Pins and Brace Assembly Center Pins | 10/22/1996 |
| SB 631-32-128 |
1 |
en |
Main Landing Gear - Inspection of the Main Landing Gear Swinging Lever/Barrel and Shock Absorber/Universal Joint Hinge Pins | 11/15/1996 |
| SB 631-32-132 |
|
en |
NDT Inspection of the MLG Barrel Lower Lugs | 01/21/1997 |
| SB 631-32-133 |
|
en |
Main Landing Gear - Reconditioning of the Barrel Lower Lugs in Workshop and Installation of the New Bushes on Swinging Lever | 02/24/1997 |
| SB 631-32-133 |
CN 1 |
en |
Main Landing Gear - Reconditioning of the Barrel Lower Lugs in Workshop and Installation of the New Bushes on Swinging Lever | 03/18/1997 |
| SB 631-32-144 |
|
en |
Inspection of Rubber Sealant Around Bushes at Barrel/Swinging Lever Hinge Point | 01/19/1998 |
| SB 631-32-145 |
|
en |
Main Landing Gear - Reconditioning of the Barrel Lower Lugs in Workshop and Installation of New Bushes on Swinging Lever/Barrel Hinge | 02/16/1998 |
| SB 631-32-145 |
1 |
en |
Main Landing Gear - Reconditioning of the Barrel Lower Lugs in Workshop and Installation of New Bushes on Swinging Lever/Barrel Hinge | 05/31/1999 |
| SB 800-32-027 |
|
en |
Nose Landing Gear - Inspection of the Shock Absorber Axle Adapter | 05/07/1997 |
| SB A33/34-32-272 |
|
en |
Landing Gear - Main Landing Gear - Inspection of the Bogie Beam Internal Diameter for Corrosion | 11/16/2007 |
| SB A33/34-32-272 |
1 |
en |
Landing Gear - Main Landing Gear - Inspection of the Bogie Beam Internal Diameter for Corrosion | 09/22/2008 |
| SB A33/34-32-278 |
1 |
en |
Landing Gear - Main Landing Gear - Inspection of the Bogie Beam Internal Diameter for Corrosion at Overhaul | 08/24/2011 |
| SB A33/34-32-283 |
1 |
en |
Landing Gear - Main Landing Gear - Bogie and Dressings - Introduction of a New Bogie and Dressings with a New Two Coat Paint Procedure | 07/10/2012 |
| SB A33/34-32-284 |
1 |
en |
Landing Gear - Main Landing Gear - Bogie and Dressings - Introduction of a New Bogie and Dressings with a New Two Coat Paint Procedure | 07/10/2012 |
| SB A33/34-32-305 |
|
en |
Landing Gear - Main Landing Gear - Bogie and Dressings - Introduction of a New Bogie Beam | 04/13/2015 |
| SB A33/34-32-306 |
1 |
en |
Landing Gear - Main Landing Gear - Bogie and Dressings - Bogie Assembly - Introduction of a New Bogie Beam | 05/31/2016 |
| SB F50-32-48 |
4 |
en |
Landing Gear - Main Landing Gear - Over Extension of the Sliding Member | 06/21/1995 |
| SB F100-32-86 |
2 |
en |
Landing Gear - Main Landing Gear - Inspection of the Main Fitting Sub-Assembly | 07/03/1997 |
| SB F100-32-112 |
|
en |
Landing Gear - Main Landing Gear - Introduction of a New Main Fitting, Sliding Member and Associated Parts | 07/01/2009 |
| SB M-DT 17002-32-10 |
3 |
en |
Main Landing Gear Shock Strut - Upper and Lower Joint Inspection | 09/06/1996 |
| SB P180-32-32 |
|
en |
Landing Gear - Main Landing Gear - Inspection of the Lever Hinge Fitting | 09/10/2012 |
