Service Information: Whirl Wind Propellers
There will be over 135,000 documents in our Service Information Indexes. If the SB that you need is not yet a link (or is not listed), Contact Us. Please mention the AD No. in your message.
Most SBs are displayed in PDF format. (Use your Browser's 'Edit | Find' function to locate an SB by number.)
Table of Contents
Drawings • Installation & Operation Instructions • Service Letters
| Name | Revision | Lang | Subject | Date |
|---|---|---|---|---|
| Draw | en | Lycomng Flywheel and Engine Flange Assembly | ||
| Draw | en | GA200-L 816 Hub with Bolts |
| Name | Revision | Lang | Subject | Date |
|---|---|---|---|---|
| IOI GA-200CN | 4 | en | GA-200CN (70"-72") for Continental O200 and Lycoming 233/235 | 10/31/2020 |
| IOI GA-200CN | 5 | en | GA-200CN (70"-72") for Continental O200 and Lycoming 233/235 | 09/01/2024 |
| IOI GA-200L | 11 | en | GA-200L for 616, 716, 816 Lycoming Engines | 10/31/2020 |
| IOI GA-200L | 11 (rev) | en | GA-200L for 616, 716, 816 Lycoming Engines | 07/31/2021 |
| IOI GA-200L | 13 | en | GA-200L for 616, 716, 816 Lycoming Engines | 12/31/2021 |
| IOI GA-200L | 19 | en | GA-200L for 616, 716, 816 Lycoming Engines | 05/31/2024 |
| IOI GA-200L | 20 | en | GA-200L for 616, 716, 816 Lycoming Engines | 09/01/2024 |
| IOI GA-J2B | 3 | en | GA-J2B (63"-65") (9"-11.3" Spinners) | 10/31/2020 |
| IOI GA-J2B | 5 | en | GA-J2B (63"-65") (9"-11.3" Spinners) | 09/01/2024 |
| IOI GA-R3B-70 | 3 | en | GA-R3B-70 for Rotax 915 Engines | 10/31/2020 |
| IOI GA-R3B-70 | 4 | en | GA-R3B-70 for Rotax 915 Engines | 03/31/2021 |
| IOI GA-R3B-70 | 5 | en | GA-R3B-70 for Rotax 915 Engines | 09/01/2024 |
| IOI GA-RW3B/RZ3B | 12 | en | GA-RW3B/RZ3B (GA-RW3B, GA-RZ3B and GA-RW3B-STOL75) for Rotax 912 / 914 Engines | 09/01/2024 |
| IOI GA-RW3B/RZ3B | 5 | en | GA-RW3B/RZ3B (GA-RW3B, GA-RZ3B and GA-RW3B-STOL75) for Rotax 912 / 914 Engines | 10/31/2020 |
| IOI GA-RW3B/RZ3B | 7 | en | GA-RW3B/RZ3B (GA-RW3B, GA-RZ3B and GA-RW3B-STOL75) for Rotax 912 / 914 Engines | 04/30/2021 |
| IOI GA-UL260-2B | 3 | en | GA-UL260-2B (64"-66") for UL260 Engines | 10/31/2020 |
| IOI GA-UL260-2B | 4 | en | GA-UL260-2B (64"-66") for UL260 Engines | 09/01/2024 |
| IOI GA-UL350-2B | 4 | en | GA-UL350-2B (70") (9"-11.3" Spinners) for UL350 Engines | 10/31/2020 |
| IOI GA-UL350-2B | 5 | en | GA-UL350-2B (70") (9"-11.3" Spinners) for UL350 Engines | 09/01/2024 |
| IOI GA-UL350-3B | 3 | en | GA-UL350-3B for UL350 Engines | 10/31/2020 |
| IOI GA-UL350-3B | 4 | en | GA-UL350-3B for UL350 Engines | 09/01/2024 |
| IOI GA300L | 5 | en | GA300L for 816 Lycoming Engines | 10/31/2020 |
| IOI GA300L | 6 | en | GA300L for 816 Lycoming Engines | 11/30/2021 |
| IOI GA300L | 8 | en | GA300L for 816 Lycoming Engines | 09/01/2024 |
| Name | Revision | Lang | Subject | Date |
|---|---|---|---|---|
| SL 151-042607 | en | Mandatory Prevention of Potential Damage to Bearings and Blade Ferrule Crackes | 05/04/2007 | |
| SL 200-082712 | en | Mandatory Hydraulic Cylinder (Hub Cap) Screws | 08/27/2012 | |
| SL 200C-051805 | en | Immediate Pin Base Replacement (P/N 20006 Rev B) | 05/18/2005 | |
| SL 200C-061004 | en | Immediate Pin Base Replacement | 06/10/2004 | |
| SL 200C/400C-0002 | en | Mandatory Blade Ferrule Root Modification | 02/04/2003 | |
| SL 200C/400C-013015 | en | Mandatory Actuating Pin Base to Outer Ferrule Attachment Bolt Hole Depth | 01/30/2015 | |
| SL 200C/400C-070214 | en | Mandatory Inner Ferrule to Outer Ferrule Screw Modification Per 2003 Service Letter SL-200C/400C-0002 | 07/08/2014 | |
| SL 200RV-040805 | en | Immediate Bulkead Bracked Inspection | 04/08/2005 | |
| SL 300-3B-72-091620 | en | Piston O-Ring Un-Seating in Hub Causing Oil Leak, Loss of Oil Pressure and Potential Loss of Pitch Control | 09/16/2020 | |
| SL 400C-020624 | en | Mandatory Replacement of McCauley Counterweights on All 400 Series Propellers | 02/06/2024 | |
| SL 200400200C-081905 | en | Mandatory Counterweight Failures on Aerobatic Propellers | 08/19/2005 | |
| SL GA-J2B-040115 | en | Hub Bolt Crack | 04/02/2015 | |
| SL GA200L-021213 | en | Hub Cracking | 02/12/2013 |